ControlThink Forums

 I have the original Intermatic HA22 USB stick that came with the SDK when it first came out.  I am not having any luck installing this in Windows 7 x64.  I tried the drivers that worked in Vista (that I got from this forum) as well as the drivers from the Intermatic website for the newer HA23.  The newer drivers seem to install ok (there is no warning at least) but the HA22 shows a yellow exclamation point next to it in Device Manager.  Is there anyone who has been able to get this to work?

I had to enable unsigned drivers and set Windows 7 / R2008R2 x64 to boot in "test mode".  It worked fine, but eventually ended up getting a thinkstick to avoid this.

  Thanks for the reply.  What "unsigned drivers" were you able to use?  When I try to use the "old" drivers that worked with Vista it doesn't seem to even recognize them as drivers for the device.

I used the HA22 drivers that worked with Vista I think from this forum. HA22VISTA2.zip

The big thing was that I had to first sign the drivers with a test certificate and then set the OS to boot in test mode.

I think I used a program similar to Driver Signature Enforcement Overrider 1.3b from http://www.ngohq.com/home.php?page=dseo

If I just tried installing them even with an override I just got an exclamation icon in device manager.

Hope this helps